Information For Test Centres; Technical Specifications - Electrolux ESF 2440 Instruction Book

Information for test centres

The salt container and rinse aid dispenser shall be filled in accordance with this instruction manual.
Before conducting the measurements the dishwasher shall be operated for one or two complete cycles using
detergent and a clean load.
Test standard:
Rated capacity:
Loading of basket:
Test program:
Detergent (IEC type B):
Rinse aid (type III):
Feed water pressure:
Faste water outlet:
Any electrical work required to install this appliance,
should be carried out by a qualified electrician or
competent person.
Any plumbing work required to install this appliance,
should be carried out by a qualified plumber or
competent person.
Technical specifications
Capacity:
Dimensions:
Weight:
Water pressures:
Water temperature:
Electrical data:
Installation instructions
6 place settings accordance EN 50242
Height
Width
Depth (to the edge of the door)
Depth (to the middle of the door)
Net
Minimum
Maximum
Maximum
Power supply
Fuse
Heating element
Power rating
EN 50242 and EN 60704
6 place settings accordance EN 50242
see chapter "Loading the dishes"
energy saving 55° C
9 gram in the dispenser + 3 gram in the pre-wash dispenser
setting 3
minimum 0,8 bar, maximum 10 bar
install according to figure below
- 13 -
447 mm
546 mm
480 mm
507 mm
22 kg
80 kPa (0,8 bar)
1000 kPa (10 bar)
65° C
230 V - 50 Hz
10 A
1100 W
1180 W