Procedure - Cisco 8941 Administration Manual

Configure Phone Services for Users
For more information, see the "Cisco Unified IP Phone Services Configuration" chapter in the Cisco Unified
Communications ManagerAdministration Guide and the "Cisco Unified IP Phone Services" chapter in the
Cisco Unified Communications Manager System Guide.
To configure Cisco Extension Mobility services for users, see the "Cisco Extension Mobility" chapter in
Note
the Cisco Unified Communications Manager Features and Services Guide.
Before you set up services, gather the URLs for the sites that you want to set up and verify that users can
access those sites from your corporate IP telephony network. This activity is not applicable for the default
services that Cisco provides.

Procedure

Step 1 In Cisco Unified Communications Manager Administration, choose Device > Device Settings > Phone
Services
Step 2
Verify that your users can access the Cisco Unified Communications Self Care Portal, from which they can
select and subscribe to configured services.
See Self Care Portal Management
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0
(SCCP and SIP)
16
for a summary of the information that you must provide to end users.
Cisco Unified IP Phone Installation