Configure Phone Services For Users - Cisco 8941 Administration Manual

Cisco Unified IP Phone Installation
Table 3: LED Diagnostic Status
2 The screen displays the Cisco Systems, Inc., logo screen.
3 This message appears as the phone starts up: Phone not registered
4 The home screen displays:
If the phone successfully passes through these stages, it has started up properly.
Related Topics
Startup Problems
Cisco IP Phone Does Not Go Through Normal Startup Process

Configure Phone Services for Users

You can give users access to Cisco IP Phone Services on the IP phone. You can also assign a button to different
phone services. These services comprise XML applications and Cisco-signed Java midlets that enable the
display of interactive content with text and graphics on the phone. The IP phone manages each service as a
separate application. Examples of services include local movie times, stock quotes, and weather reports.
Before a user can access any service:
• You must use Cisco Unified Communications Manager Administration to configure services that are
• The user must subscribe to services by using the Cisco Unified Communications Self Care Portal. This
Hardware test
Power is Ready
Flash is Accessible
RAM Test Successful
Ethernet Test Successful
• Current date and time
• Primary directory number
• Additional directory numbers and speed dial numbers, if configured (only on Cisco Unified IP Phone
8941)
• Softkeys
not present by default.
web-based application provides a graphical user interface (GUI) for limited, end-user configuration of
IP phone applications. However, a user cannot subscribe to any service that you configure as an enterprise
subscription.
Cisco Unified IP Phone 8941 and 8945 Administration Guide for Cisco Unified Communications Manager 10.0 (SCCP
MWI Hold
On On
— On
— —
— —
Configure Phone Services for Users
Mute Speaker
On On
On On
On On
— On
and SIP)
15