Vehicle 12V Bare Wire Adapter; Vehicle Cable Connection Cable (Fuse Not Shown) - Honeywell MX7 Tecton User Manual

Vehicle 12V Bare Wire Adapter

Part Number: 9000A079CBL12ML3
Caution For proper and safe installation, the input power cable must be connected to a fused circuit on the vehicle. This
fused circuit requires a Amp maximum time delay (slow blow) high interrupting rating fuse. If the supply connection
is made directly to the battery, the fuse should be installed in the positive lead within 5 inches of the battery positive
(+) terminal. Note: For North America, a UL Listed fuse is to be used.
Caution
For installation by trained service personnel only.
Warning
Risk of ignition or explosion. Explosive gas mixture may be vented from battery. Work only in well ventilated area.
Avoid creating arcs and sparks at battery terminals.

Vehicle Cable Connection Cable (Fuse Not Shown)

1. To Vehicle Battery
2. To Vehicle Mounted Device
3. Green (GND)
4. Brown (DC+)
5. Blue (DC-)
6. 12VDC
3-7