Connecting Bluetooth Devices; Taskbar Connection Indicator - Honeywell MX7 Tecton User Manual

Connecting Bluetooth Devices

Before connecting to Bluetooth Devices:
The system administrator has discovered, paired, connected and disconnected (using LXEZ Pairing Control Panel)
l
Bluetooth devices for each MX7 Tecton.
The system administrator has enabled and disabled LXEZ Pairing parameters for the MX7 Tecton.
l
The system administrator has also assigned a Computer Friendly Name using LXEZ Pairing Control Panel for the MX7
l
Tecton.
To connect Bluetooth devices, the MX7 Tecton should be as close as possible and in direct line of sight (distances up to 32.8
feet or 10 meters) with the targeted Bluetooth device during the discovery and pairing process.
If the devices are in Suspend, tap the power key to wake the MX7 Tecton.
Using the correct procedure, wake the targeted Bluetooth device if necessary.
There may be audible or visual signals as both devices discover and pair with each other.

Taskbar Connection Indicator

MX7 Tecton is connected to one or more of the targeted Bluetooth device(s).
MX7 Tecton is not connected to any Bluetooth device.
MX7 Tecton is ready to connect with any Bluetooth device.
MX7 Tecton is out of range of all paired Bluetooth device(s). Connection is inactive.
There may be audible or visual signals from paired devices as they move back into range and re-connect with the Bluetooth
hardware in the MX7 Tecton.
2-15