Sharp Laser Printer Operation Manual page 55

Problem
The printer driver Is there sufficient free space on your hard
cannot be installed. drive?
Are you using an operating system that is not
supported?
Two-sided printing is Is [2-Sided (Book)] or [2-Sided (Tablet)]
not possible. selected in the "Main" tab of the printer driver?
Has two-sided printing been prohibited in the
key operator programs?
Not all of the image is Are multiple applications running at once?
printed.
Stapling does not take Has use of the staple been prohibited in the
place. key operator programs?
Did you attempt to staple more than the
maximum number of pages?
The mail-bin stacker Has the mail-bin stacker been disabled in the
cannot be used. key operator programs?
Punching does not take Is the "Punch" checkbox selected in the
place (when a punch "Main" tab of the printer driver?
module is installed).
Has use of the punch module been prohibited
in the key operator programs?
Document filing is not Has the printer driver been set to use the
possible*. document filing function?
Do user folders created in the machine
appear in "Folder Information"?
Does the user folder have a password?
* This function can be used on the AR-M355N, AR-M455N, or models that have a hard disk drive installed.
Check
Delete any unneeded files and applications to increase
free space on your hard drive.
Make sure your operating system is supported. (See
the SOFTWARE SETUP GUIDE (for printer) that
accompanied the machine.)
Select [2-Sided (Book)] or [2-Sided (Tablet)]
2).
"Disabling of Duplex" has been enabled in the key
operator programs. Consult the key operator.
Quit all applications that you are not using and try
printing again.
"Disabling of Stapler" has been enabled in the key
operator programs. Consult the key operator. The
inserter does not operate (when an inserter is
installed).
Check the maximum number of pages that can be
stapled
"DISABLING OF MAIL-BIN STACKER" has been
enabled in the key operator programs. Consult your
key operator and take action accordingly.
Select the "Punch" checkbox.
"Disabling of punch" has been enabled in the key
operator programs. Consult the key operator.
Select the "Document Filing" checkbox in the "Job
Handling" tab of the printer driver.
Click the "Get Folder Name" button in the document
filing screen to call up the folders created in the
machine.
Enter the password in "Folder Pass Code" in the
document filing screen.
7-3
TROUBLESHOOTING
Solution or cause
(page 2-4).
(page
(page
(page 2-12)
(page 2-12)
(page 2-
2-5)
2-12)