Replacing The Variable Speed Blower; Table 7-3 Blower Replacement Procedure - Compaq 4200 User Manual

7–6 Compaq StorageWorks Enclosure 4200 Family LVD Disk Enclosure User Guide

Replacing the Variable Speed Blower

NOTE: Removing a blower does not change the airflow within the enclosure. However, do not
remove a blower until the replacement blower is available.
Complete the procedures in Table 7–3 to replace a variable speed blower.
1. Remove the blower from the power supply by pushing in on the two blower tabs
pulling the blower element to the rear.
Table 7–3 Blower Replacement Procedure
WARNING: The blower blades rotate at a high speed and do not stop immediately
when power is removed. Avoid touching the rotating blades when removing the
blower.
1
1
CXO6852A
and while