Nortel i2004 User Manual page 14

When each parameter has been entered, your i2004 Internet Telephone will
attempt to connect to the server. (See Figure 8.)
Figure 8
If your telephone set cannot locate the server, it will automatically retry every two
minutes. After several attempts, if your telephone set does not locate the server,
contact your system administrator for assistance.
After successfully connecting to the server, you will be prompted to enter the
DNKey. (See Figure 9.) This information should be provided by your system
administrator. This prompt will only occur once, so if the your i2004 Internet
Telephone has completed the initialization process previously, this step will not
occur.
Figure 9
If the telephone set was previously initialized, just connect all the telephone
cords and power adapter - no additional actions are required to begin using your
i2004 Internet Telephone.
i2004 Internet Telephone - User Guide • © 2000 • NTC51.00.02.24
Version 8-6 • Page 14