Nortel i2004 User Manual page 13

Each parameter must have a corresponding entry. An error "beep" will notify you
if you attempt to advance to the next parameter without a field entry.
The following table defines the required parameters.
Parameter
SET IP
NETMASK
DEF GW
S1 IP
S1 PORT
S1 ACTION
S1 RETRY COUNT
S2 IP
S2 PORT
S2 ACTION
S2 RETRY COUNT
DHCP
Your system platform may require additional parameters. See your system
specific User Guide for details.
i2004 Internet Telephone - User Guide • © 2000 • NTC51.00.02.24
Definition
IP address for the i2004 Internet Telephone
Net submask
Default gateway IP network address
Primary server IP address
Primary server port number
Primary action code (enter 1 for UNIStim)
Primary retry count (value from 0-255, enter 10)
Secondary server IP address
Secondary server port number
Secondary action code (enter 1 for UNIStim)
Secondary retry count (value from 0-255, enter 10)
Is DHCP required? (disable with 0)
Version 8-6 • Page 13