Table of Contents
Advertisement
OPERATIONS ON VCR DECK
54
EN
S
V
Timer Programming
®
HOW
IEW
You can programme this unit to timer-record as many as
8 programmes.
With the S
V
system, timer programming is greatly
HOW
IEW
simplified because each TV programme has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the
Make sure that the unit's built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
VCR TIMER (#)
VCR/DVD
CANCEL
SHOWVIEW
ENTER
REC MODE
1
Load a cassette with the record safety tab intact.
2
Press VCR/DVD repeatedly so that the VCR lamp lights up on
the unit.
3
Press SHOWVIEW to access the S
4
Press the number keys to enter
the S
V
number of a
HOW
IEW
programme you wish to record, then
press ENTER.
If you have made a mistake, press
CANCEL (&) and input the correct
number before you press ENTER.
If the number you entered is invalid,
"ERROR" appears on the TV screen
and "Err" appears on the front display
panel. Press CANCEL (&) and input a valid S
5
The S
V
number you
HOW
IEW
entered and the matching timer-
recording information are displayed on
the TV screen. Check the programme
data.
To cancel this setting, press
SHOWVIEW or PROG/CHECK.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see "S
HOW
the Guide Programme number correctly.
S
V
HOW
IEW
SAT
1
2
3
0 – 9
4
5
6
7
8
9
0
RETURN
V
screen.
HOW
IEW
SHOWVIEW SYSTEM
V
HOW
IEW
V
®
System Setup" (
pg. 82) and set
IEW
6
Press REC MODE to select the desired recording mode. Or
press w e to select "SP/EP", then press rt to select the desired
recording mode.
7
Press the number keys to to set "VPS/PDC" to "ON" or "OFF".
8
Press ENTER to complete timer programming.
To programme another timer, repeat steps 3 – 8.
If "PROGRAM OVERLAP" appears on the TV screen, see page 56.
9
Press
VCR TIMER
number.
VCR timer lamp lights up on the unit and the DVD deck is
automatically selected. When the DVD deck is in timer standby
mode, the unit is automatically turned off.
To disengage the timer mode, press VCR TIMER (#) again.
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
programme number has been changed, the wrong programme
number will be displayed on the S
step 5. When this happens, set the correct Guide Programme
number for that station. (
NOTES:
To Timer-Record Weekly Or Daily Serials:
— in step 5, press number key "9" for weekly serials or number key
"8" for daily serials (Monday — Friday). Either "WEEKLY" or "DAILY"
appears on the TV screen. Pressing the button again makes the
corresponding indication disappear.
You can programme this unit to timer-record as many as 8
programmes. If you try to programme the unit to record a ninth,
"PROGRAMME FULL" appears on the TV screen and "FULL"
appears on the front display panel. To record the extra programme,
you must first cancel any unnecessary programmes. (
To record the programmes received by satellite receiver, record on
the DVD discs. For details, refer to "S
(
pg. 43).
number.
(#) to engage the unit's timer mode. The
V
programme screen in
HOW
IEW
pg. 82, "S
V
®
System Setup")
HOW
IEW
V
®
Timer Programming"
HOW
IEW
pg. 56)
Hide quick links:
Advertisement
Table of Contents
