Table of Contents
Advertisement
S
V
Timer Programming
®
HOW
IEW
You can programme this unit to timer-record as many as
8 programmes.
With the S
V
system, timer programming is greatly
HOW
IEW
simplified because each TV programme has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the S
Make sure that the unit's built-in clock is set properly.
Turn on the unit.
Turn on the TV and select the AV mode.
Slide the TV/CABLE/SAT/DVD switch to DVD.
DVD TIMER (#)
VCR/DVD
CANCEL (X)
SHOWVIEW
ENTER
CLEAR (8)
1
Load a recordable disc.
2
Press VCR/DVD repeatedly so that the DVD lamp lights up on
the unit.
3
Press SHOWVIEW to access the S
4
Press the number keys to
enter the PlusCode number of a
programme you wish to record,
then press ENTER.
If you have made a mistake, press
CANCEL (&) and input the correct
number before you press ENTER.
To clear all entered numbers at a
time, press CLEAR(8).
If the number you entered is invalid, "SHOWVIEW NO. ERROR
CONFIRM SHOWVIEW NO. THEN RETRY" appears on the TV
screen. Input a valid S
HOW
If "GUIDE PROGRAM IS NOT SET SELECT CHANNEL YOU WANT
TO RECORD" appears on the TV screen, set Guide Program
numbers manually. (
pg. 82)
When "PROGRAMME FULL DELETE UNWANTED TIMER
PROGRAMME" appears on the TV screen, you need to cancel some
of the reserved programmes. (
5
The S
V
number you entered and the matching timer-
HOW
IEW
recording information are displayed on the TV screen. Check the
programme data.
To cancel this setting, press SHOWVIEW or RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed; if not, see "S
HOW
the Guide Program number correctly.
V
HOW
IEW
SAT
1
2
3
0 – 9
4
5
6
7
8
9
0
RETURN
V
screen.
HOW
IEW
V
number.
IEW
pg. 47)
V
®
System Setup" (
pg. 82) and set
IEW
6
Press w e to select the desired recording option as required.
Press rt to select the desired setting, then press ENTER.
"STOP" (To advance/go back the stop time by 30 minutes, press and
hold rt).
"DAILY/WEEKLY" (
"REC MODE" (
"NAME" (
"VPS/PDC" (
7
Press ENTER to access the Programme Confirmation screen.
8
Press ENTER to complete timer programming.
To programme another timer, repeat steps 3 – 8.
If "PROGRAM OVERLAPPED" appears on the TV screen, see
number.
page 47.
9
Press DVD TIMER (#) to engage the unit's timer mode. The
DVD timer lamp lights up on the unit and the VCR deck is
automatically selected. When the VCR deck is in timer standby
mode, the unit is automatically turned off.
To disengage the timer mode, press DVD TIMER (#) again.
NOTES:
There may be cases that S
prolongs the stop time of the programming.
When two successive programmes are recorded on a DVD-RW disc
with S
HOW
second one may be left off the recording.
S
V
HOW
IEW
exclusively for On-Disc Timer programming.
If the copy limited programme is received during timer-recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you programmed.
IMPORTANT:
If you have moved to a different area or if a broadcasting station's
channel number has been changed, the wrong channel number will
be displayed on the S
this happens, set the correct Guide Program number for that station.
(
pg. 82, "S
Satellite Receiver Users
To timer-record a satellite broadcast using the S
system:
A Perform "Satellite Receiver Control Setting" (
B Perform "S
C Leave the satellite receiver's power on.
Daily/Weekly Recording
You can record programmes with one of the following weekly/daily
timer settings.
WEEKLY
: Select to record a weekly programme.
MON–FRI
: Select to record a daily programme from Monday
through Friday.
MON–SAT
: Select to record a daily programme from Monday
through Saturday.
SUN–SAT
: Select to record a daily programme from Sunday
through Saturday.
OPERATIONS ON DVD DECK
pg. 43, "Daily/Weekly Recording"))
pg. 40, "Recording Mode")
pg. 59, "Modify Programme Name")
pg. 44, "VPS/PDC Recording")
V
Timer programming function
HOW
IEW
V
Timer programming function, the beginning of the
IEW
Timer programming is not possible on the discs used
V
programme screen in step 5. When
HOW
IEW
V
®
System Setup")
HOW
IEW
V
®
Timer Programming" (
HOW
IEW
43
EN
V
HOW
IEW
pg. 21).
pg. 43).
Hide quick links:
Advertisement
Table of Contents
