JVC DR-MV1 Instructions Manual page 79

RECORDING SET
8 SAVE AS LIBRARY — OFF / ON
When this function is set to "ON", the recording information is
automatically stored in the library. For details, refer to "Modify
Library Information" ( pg. 63).
8 XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a programme in
XP mode. When this function is set to "LINEAR PCM", you can
obtain a high-quality audio sound.
DOLBY DIGITAL
: To record in Dolby Digital format.
LINEAR PCM
: To record in Linear PCM format.
8 AUDIO REC — NICAM 1/MAIN / NICAM 2/SUB / MONO
You can select the desired NICAM audio channel to be recorded
on a DVD-R/RW (Video mode) disc.
NICAM 1/MAIN
: To record the main language of NICAM audio.
NICAM 2/SUB
: To record the sub language of NICAM audio.
MONO
: To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8 DIRECT REC — OFF / ON
When this function is set to "ON", you can easily start recording the
programme that you are watching on your TV. Press and hold 7
and press 4 on the remote control, or press 7 on the unit.
NOTES:
When you use the Direct Rec function, be sure to use a TV offering
T-V LINK, etc. and connect a fully-wired 21-pin SCART cable
between the unit and the TV. (
If "DIRECT REC" is set to "OFF", the 7 button functions as described
in "Basic Recording" ( pg. 40).
During Direct Rec, "– –" appears on the front display panel.
If a programme is recorded with the Direct Rec, the station name will
not be registered in the library. "– – – –" will be displayed for the
station name.
Even if there is no power supply for more than 60 minutes, the unit
keeps the setting.
8 INPUT COLOUR SYSTEM — PAL / SECAM
You can play back PAL discs, or record PAL and SECAM signals on
this unit. Select the appropriate colour system.
PAL
: To record PAL signals.
SECAM
: To record SECAM signals.
DISPLAY SET
8 SUPERIMPOSE — OFF / AUTO
When this function is set to "AUTO", various operational indicators
appear on the TV screen. Messages appear in the selected
language. ( pg. 20)
OFF
: To turn off superimposed indications.
AUTO
: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
NOTES:
Even when "SUPERIMPOSE" is set to "OFF", you can display the
various operational indicators by pressing ON SCREEN. To clear the
operational indicators, press ON SCREEN again.
When you use this unit as the source player for editing, be sure to set
"SUPERIMPOSE" to "OFF" before starting. (
When you select "AUTO", during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
pg. 16)
pg. 79)
8 GRAY BACK — OFF / ON
When this function is set to "ON", the TV screen becomes all grey
when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to "OFF".
8 DIMMER — BRIGHT / DIM
You can change the brightness of the front display panel.
BRIGHT
: Normally select this.
DIM
: To dim the front display panel. (Blue lamp on the front display
panel is turned off.)
8 POWER SAVE — OFF / ON
When this function is set to "ON", you can reduce the power
consumption while the unit is turned off.
NOTES:
During Power Save mode —
— the front display panel will be turned off.
— the Just Clock function (
Power Save does not work when —
— the unit is in the Timer mode.
— the unit's power is turned off after timer-recording or Instant Timer
Recording.
— the Automatic Satellite Programme Recording mode is engaged.
( pg. 48)
— "L-2 SELECT" is set to "DECODER", "SAT VIDEO" or "SAT S-VIDEO".
( pg. 72)
It takes some time for the unit to complete initialisation after you turn
on unit power, with "WAKE UP" blinking on the front display panel.
8 ON SCREEN LANGUAGE
This unit offers you the choice to view on-screen messages in 10
different languages. Though Auto Set Up selects the language
automatically ( pg. 19), you can change the language setting
manually as required.
For details, refer to "On-screen Language Set" (
OTHERS
8 RESUME — ON / OFF / DISC RESUME
When this function is set to "ON" or "DISC RESUME", you can use
the resume function. ( pg. 26)
ON
: You can start playback from the resume point of the placed
disc.
OFF
: You cannot use the resume function.
DISC RESUME
: The unit retains a memory of the resume points of
the last 30 discs played back, even though they have been
ejected.
NOTE:
"DISC RESUME" setting works on DVD VIDEO, VCD, SVCD and
already finalised DVD-R/DVD-RW (video mode) discs. For other types
of discs, the function under "ON" setting will be applied even if
"RESUME" is set to "DISC RESUME".
8 AUTO TIMER — OFF / ON
When this function is set to "ON", the timer is automatically
engaged when the unit power is turned off, and automatically
disengaged when the unit is powered back on.
NOTE:
For safety, when "AUTO TIMER" is set to "OFF", all other functions are
disabled while the Timer mode is engaged. To disengage the timer,
press DVD TIMER (#).
SUBSIDIARY SETTINGS
pg. 85) does not work.
pg. 20).
79
EN