Installing Memory - Dell DIMENSION E310 DCSM Owner's Manual

NOTICE:
If you remove your original memory modules from the computer during a memory upgrade,
keep them separate from any new modules that you may have, even if you purchased the new modules
from Dell. If possible, do not pair an original memory module with a new memory module. Otherwise, your
computer may not start properly.

Installing Memory

CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity
from your body before you touch any of your computer's electronic components. You can do so by
touching an unpainted metal surface on the computer chassis.
1 Follow the procedures in "Before You Begin" on page 57.
2 Press out the securing clip at each end of the memory module connector.
3 Align the notch on the bottom of the module with the crossbar in the connector.
memory connector
closest to processor
notch
memory module
cutouts (2)
securing clips (2)
connector
crossbar
Removing and Installing Parts
67