Dell DIMENSION E310 DCSM Owner's Manual page 60

cover latch release
1
2 CD/DVD activity light
3 CD/DVD eject button
4 FlexBay drive
5 USB 2.0 connectors (2)
6 hard-drive activity light
vents
7
power button
8
9 headphone connector
diagnostic lights (4)
10
11 Service Tag
60
Removing and Installing Parts
Use this latch to remove the cover. See "Removing the
Computer Cover" on page 63.
The drive light is on when the computer reads data from the
CD or DVD drive.
Press to eject a disk from the CD or DVD drive.
Can contain an optional floppy drive or optional Media Card
Reader. For information on using the Media Card Reader, see
"Using a Media Card Reader (Optional)" on page 20.
Use the front USB connectors for devices that you connect
occasionally, such as joysticks or cameras, or for bootable USB
devices (see "System Setup Options" on page 104 for more
information on booting to a USB device). It is recommended
that you use the back USB connectors for devices that typically
remain connected, such as printers and keyboards.
The hard drive activity light is on when the computer reads
data from or writes data to the hard drive. The light might also
be on when a device such as a CD player is operating.
For adequate cooling, do not block any of the vents.
NOTICE:
Ensure that there is a minimum of two inches of
space between all vents and any object near these vents.
NOTICE:
Keep the vent area clean and dust-free to ensure
that the system is adequately ventilated. Use only a dry
cloth to clean the vent area to avoid water damage to the
system.
Press to turn on the computer.
NOTICE:
To avoid losing data, do not use the power button
to turn off the computer. Instead, perform an operating
system shutdown.
Use the headphone connector to attach headphones and most
kinds of speakers.
Use the lights to help you troubleshoot a computer problem
based on the diagnostic code. For more information, see
"Diagnostic Lights" on page 47.
Use to identify your computer when you access the Dell
Support website or call technical support.