JVC GR-DVL157 Instructions Manual page 58

58
EN
SYMPTOM
15. The picture wipe function
does not work.
16. Scene transition does not go
as expected.
17. The Video Echo mode does
not work.
18. Even when Slow Shutter is
not selected, the image looks
like it is activated.
19. There is no strobe when the
Classic Film or Strobe mode
is activated.
20. White Balance cannot be
activated.
21. When shooting a subject
illuminated by bright light,
vertical lines appear.
22. When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for an
instant.
23. During recording, the date/
time does not appear.
TROUBLESHOOTING
POSSIBLE CAUSES
15. • The Slow Shutter mode is
activated.
• "WIDE MODE" is not set to
"OFF".
16. • When using "Picture Wipe/
Dissolve" ( pg. 28), there is
a delay of a fraction of a
second between the previous
record stop-point and the
Dissolve start-point. This is
normal, but this slight delay
becomes especially notice-
able when shooting fast-
moving subject or during
rapid panning.
17. • The Picture Wipe or
Dissolve functions are in use.
• "WIDE MODE" is set to
"SQUEEZE" in the Menu
Screen.
• A Fade-In or Fade-Out is in
progress.
18. • When shooting in the dark,
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
19. • The Picture Wipe or Dissolve
function is in use.
20. • The Sepia or Monotone mode
is activated.
21. • This is a result of exceedingly
high contrast, and is not a
malfunction.
22. • This is not a malfunction.
23. • "DATE/TIME" is set to "OFF"
in the Menu Screen.
CORRECTIVE ACTION
15. • Disengage the Slow Shutter
mode or set "WIDE MODE"
to "OFF" before preparing to
use the Picture Wipe
( pg. 26, 28, 36).
16.
————
17. • Set "WIDE MODE" to
"CINEMA" or "OFF" mode
( pg. 36).
• Do not try to use the Video
Echo mode during a Fade-In
or Fade-Out ( pg. 26, 28).
18. • If you want the lighting to
look more natural, set GAIN
UP to "AGC" or "OFF" in the
Menu Screen (
19. • Do not try to use the Classic
Film or Strobe mode during a
scene transition (
28).
20. • Turn off Sepia or Monotone
before setting White Balance
( pg. 27, 33).
21.
————
22.
————
23. • Set "DATE/TIME" to "ON" in
the Menu Screen (
(cont.)
pg. 35).
pg. 26,
pg. 37).