JVC GR-DVL157 Instructions Manual page 23

1
Make sure all units are turned off.
2
Connect the camcorder to a TV or VCR as
shown in the illustration (
If using a VCR . . . go to step 3.
If not . . . go to step 4.
3
Connect the VCR output to the TV input,
referring to your VCR's instruction manual.
4
Turn on the camcorder, the VCR and the TV.
5
Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time
.... set "DATE/TIME" to "AUTO", "ON" or "OFF"
in the Menu Screen (
•Time Code
.... set "TIME CODE" to "ON" or "OFF" in the
Menu Screen (
•Playback Sound Mode, Tape Speed And Tape
Running Displays for video playback
.... set "ON SCREEN" to "LCD" or "LCD/TV" in
the Menu Screen (
Or, press DISPLAY on the remote control
(provided).
pg. 22).
pg. 38).
pg. 38).
pg. 38).
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack
( pg. 9).
To monitor the picture and sound from the
camcorder without inserting a tape, set the
camcorder's Power Switch to "
set your TV to the appropriate input mode.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
23
EN
" or " ", then