For Recording; Night-Scope; Programme Ae With Special Effects; Night-Scope Button - JVC GR-DVL157 Instructions Manual

Hide thumbs Also See for GR-DVL157:
Table of Contents

Advertisement

26
EN
NOTES:
During Night-Scope, the following functions
or settings cannot be activated and its
indicator blinks or goes out:
• Some modes of "Programme AE With
Special Effects" (
Wipe/Dissolve" (
• "GAIN UP" in the CAMERA Menu
(
pg. 35).
• "DIS" in the MANUAL Menu (
• "Video light" when LIGHT OFF/AUTO/ON
is set to "AUTO" (
During Night-Scope, it may be difficult to
bring the camcorder into focus. To prevent
this, use of a tripod is recommended.
MENU/BRIGHT Wheel
Power Switch
SHUT T
SPORT
SNOW
SPOT L
TW I L I
SEP I A
MONOT
CLASS
STROB
SL
OW
SL
OW
pg. 26, 27), "Picture
pg. 28, 29).
pg. 35).
pg. 19).
Lock Button

NIGHT-SCOPE Button

P.AE Button
Display
ER
1/120
S
G I HT
GHT
ONE
I C F I LM
E
4
X
10
X

Night-Scope

Makes dark subjects or areas even brighter than they
would be under good natural lighting. Although the
recorded image is not grainy, it may look as if it is strobing
due to the slow shutter speed.
1
Set the Power Switch to "
the Lock Button located on the switch.
2
Press NIGHT-SCOPE so that the Night-Scope
indicator "
"appears.
•The shutter speed is automatically adjusted to
provide up to 30 times sensitivity.
•"A" appears beside "
being automatically adjusted.
To Deactivate Night-Scope . . .
.... press NIGHT-SCOPE again so that the Night-Scope
indicator disappears.

Programme AE With Special Effects

1
Set the Power Switch to "
the Lock Button located on the switch.
2
Press the MENU/BRIGHT wheel in. The Menu
Screen appears.
3
Rotate the MENU/BRIGHT wheel to select "
PROGRAM AE", then press it.
4
Rotate the MENU/BRIGHT wheel to select the
desired mode (
complete. Press the MENU/BRIGHT wheel in again.
The Menu Screen closes.
5
Press P.AE so that the selected effect indicator
appears.
To Deactivate The Selected Mode . . .
.... press P.AE again so that the effect indicator disappears.
NOTES:
Programme AE with special effects can be changed
during recording or during Record-Standby.
Some modes of Programme AE special effects cannot be
used during Night-Scope.
IMPORTANT:
Some modes of Programme AE with special effects
cannot be used with certain Fade/Wipe Effects
(
pg. 28, 29). If an unusable mode is selected, its
indicator blinks or goes out.

FOR RECORDING

" while pressing down
" while the shutter speed is
" while pressing down
pg. 27), then press it. Selection is

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents