YSI 6 series User Manual page 366

Specifications
Computer Interface:
Internal logging
memory size:
Power:
Battery Life:
6920V2-1 SONDE
Available Sensors
Operating Environment Medium: fresh, sea, or polluted water
Storage Temperature:
Material:
Diameter:
Length:
Weight:
Computer Interface:
Internal logging
memory size:
Power:
Battery Life:
YSI Incorporated Environmental Monitoring Systems Operations Manual
RS-232C, SDI-12
384 kilobytes (150,000 individual parameter readings)
8 C-size Alkaline Batteries or External 12 VDC
Approximately 55 days at 20 C at a 15 minute logging interval, and temperature,
conductivity, pH/ORP, ROX Optical DO, Turbidity, Chlorophyll, and BGA-PC
(or BGA-PE) sensors active. Battery life is heavily dependent on sensor
configuration and is given above for a typical sensor ensemble. If you have a
different sensor configuration, set up your sonde for a deployment in the
Run|Unattended menu and check the projected approximate battery life.
Temperature, Conductivity, Rapid Pulse Dissolved Oxygen, pH, ORP, three ion
selective electrodes (ammonium, nitrate, chloride), and Depth (shallow, medium,
shallow vented). One total optical sensor (ROX Optical DO, Turbidity,
Chlorophyll, Rhodamine WT, BGA-PC, or BGA-PE). Note that Rapid Pulse and
ROX DO sensors cannot be activated simultaneously.
Temperature: -5 to +50 C for most sensors
Depth: 0 to 200 feet (61 meters)
-40 to +60 C for sonde and all sensors except pH , pH/ORP, ISE and optical
sensors
-10 to +60 C for pH, pH/ORP, ISE, and optical sensors
Polyurethane, PVC, Stainless Steel
2.9 inches (7.4 cm)
Approximately 18.25 inches (46.4 cm) with no depth.
Approximately 3.74 pounds (1.7 kg).
RS-232C, SDI-12
384 kilobytes (150,000 individual parameter readings)
8 AA-size Alkaline Batteries or External 12 VDC
Approximately 30 days at 20 C at 15 minute logging interval with temperature,
conductivity, pH/ORP, and Rapid Pulse DO with a 40-second DO warm up time,
and one optical probe other than ROX optical DO active. Battery life is heavily
dependent on sensor configuration and is given above for a typical sensor
ensemble. If you have a different sensor configuration, set up your sonde for a
deployment in the Run|Unattended menu and check the projected approximate
battery life.
Appendix O
O-3