YSI 6 series User Manual page 303

Health and Safety
YSI Turbidity Standard: 6073
INGREDIENTS
θ
Styrene divinylbenzene copolymer spheres
The material is not volatile and has no known ill effects on skin, eyes, or on ingestion. Therefore, no
special precautions are required when using the standards. General precautions should be adopted as
required with all materials to minimize unnecessary contact. Note, however, that the chemical,
physical, and toxicological properties have not been thoroughly investigated.
FIRST AID:
SKIN CONTACT - Remove contaminated clothing. Wash affected area with soap or mild detergent
and water.
EYE CONTACT - Wash eyes immediately with large amounts of water (approx. 15-20 minutes),
occasionally lifting upper and lower lids. If irritation occurs, seek medical attention immediately.
INGESTION - Rinse out mouth with large quantities of water. If irritation occurs or reagent was
swallowed, seek medical attention as a precaution.
YSI Replacement Desiccant 065802
INGREDIENTS
θ
Calcium Sulfate and Calcium Chloride
- AVOID INHALATION, SKIN CONTACT, EYE CONTACT OR INGESTION.
CAUTION
MAY AFFECT MUCOUS MEMBRANES.
FIRST AID:
SKIN CONTACT - Flush with water.
EYE CONTACT - Flush with water. If irritation continues, obtain medical attention.
INGESTION - If patient is conscious, induce vomiting. Obtain medical attention.
YSI Incorporated Environmental Monitoring Systems Operations Manual
Appendix A
A-6