Connecting Your Monitor - Iiyama ProLite E2271HDS User Manual

CONNECTING YOUR MONITOR

Ensure that both the computer and the monitor are switched off.
Connect the computer to the monitor with the signal cable.
Connect the monitor to the audio equipment with the Audio Cable for computer when using the
audio features.
Connect the AC Adapter to the monitor and the Power Cable to the AC Adapter fi rst and then
connect to the power supply.
Turn on your monitor and computer.
NOTE The signal cables used for connecting the computer and monitor may vary with the type of
computer used. An incorrect connection may cause serious damage to both the monitor and
the computer. The cable supplied with the monitor is for a standard 15 pin D-Sub connector. If
a special cable is required please contact your local iiyama dealer or regional iiyama offi ce.
For connection to Macintosh computers, contact your local iiyama dealer or regional iiyama
offi ce for a suitable adaptor.
Make sure you tighten the fi nger screws at each end of the signal cable.
[Example of Connection]
AV Equipment
Computer
* Available for ProLite E2271HDS only.
<Back>
HDMI Cable
(Not included)*
DVI-D Signal Cable
(Accessory)
D-Sub Signal Cable
(Accessory)
Audio Cable (Accessory)
Power Cable
AC Adapter
(Accessory)
(Accessory)
BEFORE YOU OPERATE THE MONITOR 7