Fitting And Removal Of Base - Iiyama ProLite E2271HDS User Manual

FITTING AND REMOVAL OF BASE

Put the monitor on a stable surface. The monitor may cause injury or damage if it
CAUTION
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid electric shock or damage.
<Installation>
A Put a piece of soft cloth on the table beforehand
to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face
down.
B Install the Stand-Base to the Monitor.
C Fix the Monitor to the Stand by the attached
screw fi rmly and the push-down knob.
<Removal>
A Put a piece of soft cloth on the table beforehand
to prevent the monitor from being scratched.
Lay the monitor flat on a table with front face
down.
B Pull the knob upwards, then remove the screw.
C Press and hold the hooks inside, and pull the
Stand-Base.
Stand-Base
Hooks
BEFORE YOU OPERATE THE MONITOR
Stand-Base
Screw for Stand-Base
fi xing
Stand-Base
5