Conventional Operation; Turning Power On; Channel Selection - Icom IC-F25 Instruction Manual

Uhf/vhf transceiver

Hide thumbs Also See for IC-F25:

Instruction manual (48 pages)

Service manual (32 pages)

Servise manual (8 pages)

Table Of Contents

Table of Contents

I Turning power ON

➥ Rotate [VOL] to turn power ON.

I Channel selection

IC-F15S/F25S:

Toggle [CHANNEL SWITCH] to select

the channel 1 or 2, or, push one of [MR-

CH 1] to [MR-CH 4] key to select a chan-

nel directly.

• The memory channels 3 and 4 are avail-

able when [MR-CH 3] and [MR-CH 4]

keys are assigned.

IC-F15/F25:

Rotate [CHANNEL SELECTOR] to se-

lect the desired operating channel, in se-

quence; or, push one of [MR-CH 1] to

[MR-CH 4] key to select a channel di-

rectly.

AUTOMATIC SCAN TYPE:

Channel setting is not necessary for this type. When turning the

power ON, the transceiver automatically starts scanning. Scanning

stops when receiving a call.