Icom IC-F25 Instruction Manual page 37

This warning symbol indicates that this equipment op-
erates in non-harmonised frequency bands and/or may
be subject to licensing conditions in the country of use.
Be sure to check that you have the correct version of
this radio or the correct programming of this radio, to
comply with national licensing requirement.
We Icom Inc. Japan
1-1-32, Kamiminami, Hirano-ku
Osaka 547-0003, Japan
Declare on our sole responsibility that this equipment complies with the
essential requirements of the Radio and Telecommunications Terminal
Equipment Directive, 1999/5/EC, and that any applicable Essential Test
Suite measurements have been performed.
Kind of equipment: UHF TRANSCEIVER
iC- f25/s
Type-designation:
Version (where applicable):
This compliance is based on conformity with the following harmonised
standards, specifications or documents:
i) EN 301 489-1 v1.3.1 (Sept 2001)
ii) EN 301 489-5 (August 2000)
iii) EN 60950 (August 1992+A11)
iv) EN 300 086-2 (March 2001)
v) EN 300 219-2 (March 2001)
vi) EN 300 113-2 (March 2001)
400–470 MHz 12.5 kHz/20 kHz/25 kHz
DOC
DECLARATION
OF CONFORMITY
0168
Düsseldorf 30th July 2004
Place and date of issue
Authorized representative name
Signature
8
8
33