Factory Reset - Universal Remote Control URC-A6 Owner's Manual

Factory Reset

You can reset your URC-A6 remote to the
original factory default settings.
Press and hold both the [TV] and RECORD
[REC] buttons for about five seconds until the
[CABLE/SAT] Component light blinks five
times. All programming and set-up codes
that you have entered into the remote will be
erased and the URC-A6 will return to the
original factory default settings.
Replace
with
high
quality
image
Warning
This procedure will erase all programming
and set-up codes that you have entered into
the remote.
Page | 32