Erasing Simplesound & Other Punch Through Commands - Universal Remote Control URC-A6 Owner's Manual

Erasing SimpleSound & Other
Punch Through Commands
STEP 1: Press and hold the Component
button you want to erase volume control
from, such as DVD and the SELECT
[SEL] button at the same time for two
seconds until the Component light turns on.
STEP 2: Press the VOLUME UP [VOL ▲]
button and the same Component button from
Step 1. The component light will blink three
times to confirm the erasure.
Repeat Steps 1—2 to erase SimpleSound
commands from other components.
NOTE: To erase other "punch through"
commands, simply press the following
buttons in place of VOLUME UP in Step 2:
● For Channel Control, press: CHANNEL
UP [CH▲]
● For Transport Control, press: PLAY [ ]
● For On-Screen Display ( OSD) Control,
press: [MENU]
Page | 31
Replace
with
high
quality
image