Universal Remote Control URC-A6 Owner's Manual page 15

Step 5: You can continue learning all other
buttons from your old remote by pressing the
next button on the URC-A6 and repeating
this step.
Note: The component light will blink five
times if there was an error in the learning
process. In this case, please repeat Steps 3
and 4.
STEP 6: Save your work. Once the URC-A6
has learned all the buttons for the selected
component, press and hold the Component
button and ENTER buttons at the same time
to save the learned functions. The component
light will blink three times to confirm the set-
up.
Check your work. Test all the buttons to
make sure they learned correctly. Repeat
Steps 1-5 to program any other component
modes.
We love to e-mail!
PLEASE CONTACT OUR TECHNICAL
E-MAIL: techsupport@UniversalRemote.com
Phone: 1-800-901-0800 (9:00AM - 6:00PM
PLEASE DO NOT RETURN
THIS PRODUCT TO THE STORE
Page | 14
SUPPORT CENTER.
EST Monday - Friday)
Replace
with
high
quality
image