Table of Contents
Advertisement
4. CLEANING YOUR REFRIGERATOR
¥ Before you clean the
¥ The refrigerator may
refrigerator, unplug the
smell during the initial
power cord. To clean,
operation, but the odour
use a soft piece of cloth.
will fade away when the
Wash with warm, soapy
refrigerator is cooled
water rinse and dry.
sufficiently.
Soft cloth
¥ Do not sprinkle water
¥ Put the parts back in
directly on the
their original positions
refrigerator itself.
after cleaning.
¥ Use a soft cloth for
cleaning the interior and
exterior of the
refrigerator.
Soft cloth
7
HOW TO INSTALL
Location
Install the refrigerator in a convenient location away from extreme heat and
cold. Allow at least 6cm clearance between the refrigerator and side wall so
that the door may open for a fully usable interior and the refrigerator may
have good air circulation. The refrigerator is not designed for recessed
installation.
Select a strong and level floor.
Keep 6cm of space between
the refrigerator and the walls.
Leveling
Level the refrigerator so that it rests solidly on the floor without rocking.
There are two leveling feet at each front corner. Turn to the left to raise a
corner, to the right to lower it. Use shims under the rear corners, if
necessary.
If you want the refrigerator door to close naturally, adjust the leveling feet so
that the front of the refrigerator is raised by 5mm.
If you want the refrigerator to remain motionless when open, adjust the leveling
feet so that all four corners are leveled with each other.
All packing materials used to ensure safety during transport should be
removed. You must remove the transport safty packing and wipe off any
possible adhesive tape residues with a petroleum-based cleaner or similar
solvent.
the wall
6cm
8
Advertisement
Table of Contents
