Table of Contents
Advertisement
DSL-G624M Wireless 108G MIMO ADSL2/2+ Router User's Guide
Firmware
Performing a Firmware Upgrade can sometimes change the configuration settings. Be
sure to back-up the Router's configuration settings before upgrading the firmware.
Note
Use the Firmware Upgrade menu to load the latest firmware for the device. Note that the device configuration settings
may return to the factory default settings, so make sure you save the configuration settings with the System Settings
menu described above. Firmware should only be upgrade when requested to do so be D-Link Service Personnel or you
require an additional advanced user feature.
Warning
- Firmware Upgrades can be risky and could lead to your device becoming usable if unsuccessful.
To upgrade firmware, type in the name and path of the file or click on the Browse button to search for the file. Click the
Apply button to begin copying the file. The file will load and restart the Router automatically. This proceeds will take a
few minutes pending on the size of the file. Please be patient as this make take up to 5-10 minutes depending on your
environment.
A Restore Factory Default setting is recommended after conducting a firmware update; please remember to backup
your Configuration by using the Save System settings beforehand.
Warning
– Never disconnect the power during a firmware upgrade as this will lead to a device failure.
Firmware Upgrade
45
Advertisement
Table of Contents
