Table of Contents
Advertisement
Static IP Address for Connection WAN
When the Router is configured to use Static
IP Address assignment for the WAN
connection, you must manually assign a
global IP Address, Subnet Mask and
Gateway IP Address used for the WAN
connection. Most users will also need to
configure DNS server IP settings in the DNS
Settings configuration menu (see below).
Follow the instruction below to configure the
Router to use Static IP Address assignment
for the WAN connection.
To configure a Dynamic IP Address
connection, perform the steps listed below.
Some of the settings do not need to be
changed the first time the device is set up, but
can be changed later if you choose. See the
table below for a description of all the
settings available in this menu.
1. Choose the RFC2684Bridged option from the click-boxes beside the WAN Type field.
2. Under the VPI/VCI at the top of the menu should not be changed unless you have been instructed to change
them. However, if you are instructed to change the VPI or VCI values, type in the values assigned for your
account. Leave the PVC Number setting at the default (Pcv0) values for now. This can be used later if you are
configuring multiple virtual circuits for your ADSL service.
3. Under the Connection Type field, you can choose from Pure Bridged, Static IP, or DHCP from the click-
boxes. This defines both the connection type used for your ADSL service. These instructions are for the Static
IP option. The other options are discussed below. The menu will change entry fields to allow the entry of the
necessary information based upon your selection.
4. In the Encap. field, you can choose LLC or VcMux as the encapsulation type by clicking the click-box beside
the Encap. field − as instructed by your ISP.
5. Change the IP Address, Subnet Mask, Gateway Address as instructed by your ISP. These are the global IP
settings for the WAN interface. This is the "visible" IP address of your account. Your ISP should have
provided these IP settings to you.
6.
When you are satisfied that all the WAN settings are configured correctly, click on the Apply button.
The settings and menus for the RFC2684Bridged
connection types are identical. Follow the instructions above for both connection types.
Note
DSL-G624M Wireless ADSL Router User's Guide
Static IP
−
Static IP and the RFC2684Routed
28
WAN
Settings -
Advertisement
Table of Contents
