Table of Contents
Advertisement
DSL-G624M Wireless 108G MIMO ADSL2/2+ Router User's Guide
Ethernet port, you must install an Ethernet NIC adapter before you can use the Router. If you must install an adapter,
follow the installation instructions that come with the Ethernet NIC adapter.
Wireless LAN Configuration
Wireless LAN settings for 802.11g and 802.11b wireless operation must be enabled using the Setup Wizard before it
can be configured. Basic wireless settings including the Channel and SSID can be configured through the Setup Wizard.
Advanced wireless security settings can also be configured with the Setup Wizard.
Security for wireless communication can be accomplished in a number of ways. The DSL-G624M supports WEP, WPA
and WPA -PSK.
Additional Software
It may be necessary to install software on your computer that enables the computer to access the Internet. Additional
software must be installed if you are using the device a simple bridge. For a bridged connection, the information needed
to make and maintain the Internet connection is stored on another computer or gateway device, not in the Router itself.
If your ADSL service is delivered through a PPPoE, PPPoA or Static IP connection, the information needed to establish
and maintain the Internet connection can be stored in the Router. In this case, it is not necessary to install software on
your computer. It may however be necessary to change some settings in the device, including account information used
to identify and verify the connection.
v
Advertisement
Table of Contents
