Firmware Upgrade - D-Link Go-RT-N300 User Manual

Section 3 - Configuration
This page allows you to upgrade the firmware of the Router. If you plan to install new firmware, make sure the firmware you
want to use is on the local hard drive of the computer. Please check the D-Link support site for firmware updates at http://
support.dlink.com. You can download firmware upgrades to your hard drive from the D-Link support site.
Browse:
After you download the firmware file from http://support.
dlink.com to your computer or thumb drive, click Browse
and locate the file. Select it and click Open.
Automatically
Check this box if you want to reset the router back to the
reset default
factory default settings after upgrading the new firmware.
after firmware
You will lose all your settings and will have to configure your
upgraded:
router again.
Upload:
Click to upgrade the firmware. Do NOT power the router off
during this process. It will corrupt the router.
Reset:
Click to cancel the selection.
Click the Upload button to upload a file to the router after you have selected it, or click the
Reset button to cancel the selection.
D-Link GO-RT-N300 User Manual

Firmware Upgrade

39