Manually Programming Racing Systems; Editing The Car - Uniden USC230 Owner's Manual

SC230 Paper OM 062206.fm Page 48 Friday, July 21, 2006 7:39 PM
Manually Programming Racing
Systems
Program SysteM
Menu
New System
E
Confirm?
The scanner creates an empty racing system, with a
default name of System nnn
you add new systems. R indicates that this is a racing
system.
Refer to the appropriate section to set system-wide options:
• See "Editing the System Name" on Page 54
• See "Setting Group Lockout" on Page 55
• See "Setting the System Hold Time" on Page 55
• See "Setting the Channel Delay Time" on Page 56
• See "Setting Data Skip" on Page 56
• See "Editing the Car" on Page 48
• See "Deleting Systems" on Page 57
• See "Copying Systems" on Page 57

Editing the Car

Program SysteM
Menu
Select the system
E
Edit Car
Select the car E
Follow these steps to enter the car options.
Rotate the scroll control to select one of the following
options. Then refer to the appropriate section to set or
change a car setting.
• See "Entering/Editing a Car Number" on Page 49.
• See "Editing a Driver" on Page 49.
• See "Setting a Car's Quick Key" on Page 50.
• See "Editing a Car's Channel" on Page 50.
• See "Deleting a Car" on Page 50.
• See "Setting Lockout On A Car" on Page 51.
Programming Radio Systems
E
E
Racing
R. nnn increments as
E
E
48
E