Setting Channel Alert; Setting Ctcss/Dcs - Uniden USC230 Owner's Manual

SC230 Paper OM 062206.fm Page 61 Friday, July 21, 2006 7:39 PM

Setting Channel Alert

program system
Menu
Select the system
E
Edit Group
Select the group
E
Edit Channel
Select the channel
E
Set Alert
This setting controls whether the scanner will alert you
when the channel becomes active. Select your setting,
then press E.
On - the scanner beeps when the channel becomes active.
Off - no alert sounds.
Note: The default setting is Off.

Setting CTCSS/DCS

program system
Menu
Select the system
E
Edit Group
Select the group
E
Edit Channel
Select the channel
Set CTCSS/DCS
This setting controls how a subaudible CTCSS or DCS is
used for the channel. Select your setting, then press E.
Off - any signal opens squelch.
Search - the scanner searches for and displays any
CTCSS or DCS tone that accompanies the transmission.
CTCSS - the scanner only opens squelch if the CTCSS tone
you select is also present with the signal. The scanner
then prompts you to scroll to the desired tone.
Programming/Editing Optional Settings
E
E
E
E
E
E
E
E
E
61