Sys Menu - Furuno CH-250 Operator's Manual

5.3

SYS Menu

This menu provides items which may be set according to operator's preference. A demonstration
mode is provided to acquaint you with the many functions of this equipment, and it may be used
without connection of the transducer.
1. Press the [MENU] key to open the menu.
2. Press to select MENU, and then press
3. Press to select GO TO SYS MENU.
4. Press to select YES.
: SELECT
5. Press or to select item desired.
6. Press or to open corresponding dialog box.
7. Press or to select option.
8. Press the [MENU] key twice to register your selection and close the menu.
** SYSTEM MENU **
SYSTEM SETTING:
RANGE-SONAR MODE
RANGE-VERTICAL MODE
RANGE-E/S MODE
COLOR PALETTE
LANGUAGE
SYSTEM BACKUP
LOAD BACKUP DATA
HEADING OFFSET
ADJ MOTION SENSOR
TX FREQ ADJUST
TEST
TEST PATTERN
DEMO MODE
DEFAULT
: MENU DISPLAY
Figure 5-7 System menu
to select SYS.
Adjusted at installation.
See installation manual.
See Chapter 6.
MENU: END
5-7