Air Control Valves; Topside Control Panel - Master Spas LEGEND LSX700 Owner's Manual

GLOSSARY OF SPA TERMINOLOGY
6. CASCADE WATERFALL
Located on the topside of the spa, this valve adjusts water flow to the cascade waterfall and the
Laminar Flow Jets. This feature is available on the Legend Series only.
Recommendations" for instructions on cleaning your Laminar Flow Jets.
NOTE: When water features are not going to be used for an extended period of time, turn valve slightly
to allow some water to flow when pump is on to prevent stagnent water from developing in the
water lines.
Cascade Waterfall / Laminar Flow Valve

7. AIR CONTROL VALVES

These are located around the top of your spa. You may increase or decrease the force of your jets
by opening or closing the air control valves. Typically, one dial controls the air to water ratio and
mix to one group of jets. When not in use the air controls should be kept in the closed position,
as air bubbles tend to cool the water. NOTE: Only available on Legend Series Spas. Down East Spas
automatically inject air.
Air Control Valve

8. TOPSIDE CONTROL PANEL

You may safely control spa functions from inside or outside your spa using the Topside Control
Panel. This Panel is used to control the water temperature, pumps, the spa light, automatic
filtration cycles and other advanced functions. The digital display will give you a constant
temperature readout and will notify you in case of certain malfunctions. Several user
programmable functions are also available.
DO NOT DIVE.
LAMINAR FLOW VALVE
/
12
NOTE: See "Maintenance
Laminar Flow Jets