HUSKY LINERS 6230FR Care And Use Instructions

THANK YOU FOR SELECTING A HUSKY FLOOR LINER
Your new floor liner is custom molded to fit your particular vehicle. The liner is made to take the place of your
factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new floor
liner. However, do not remove the factory-installed carpeting.
Your liner is made from an engineering resin that is lightweight and extremely tough and durable. The easiest
way to clean your liner is with a damp cloth or sponge. If using a cleaner, 409
®
Armor All , Son-of-a-Gun
INSTALLATION INSTRUCTIONS FOR YOUR BLAZER
BRAVADA/JIMMY/ENVOY SECOND SEAT FLOOR LINERS
LEFT OR
DRIVER'S
SIDE
DO TO DIFFERENCES IN SEAT STYLES IN VARIOUS VEHICLES, FIRST INSTALL YOUR LINERS AS SHOWN
ABOVE, MOVING THE SEATS THROUGH THEIR ENTIRE RANGE OF MOTION. IF THE LINER(S) INTERFERE
WITH SEAT TRAVEL, IT MAY BE NECESSARY TO TRIM YOUR LINERS AS SHOWN ABOVE. REMOVE THE
MATERIAL FROM THE TOP OF THE RAISED AREAS LEAVING A _ INCH LIP. A UTILITY KNIFE OR SCISSORS
WORK WELL FOR TRIMMING.
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
®
or similar items is discouraged as these products make the liner slick.
FRONT OF VEHICLE
®
or Glass Plus
RIGHT OR
PASSENGER'S
SIDE
NOTICE: RIGHT LINER
OVERLAPS LEFT LINER
®
work well. Use of
6230FR~1.DOC
Rev: 0
02/01/01