HUSKY LINERS 6147 Care And Use Instructions

THANK YOU FOR SELECTING A HUSKY FLOOR LINER
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before installing your new
floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
Use of Armor All , Son-of-a-Gun
INSTALLATION INSTRUCTIONS FOR YOUR SECOND SEAT CHEVROLET
SILVERADO & GMC SIERRA 1500 SERIES CREW CAB FLOOR LINERS
LEFT OR
DRIVER'S
SIDE
SOME 2004 MODEL YEAR HD SERIES CREW CAB TRUCKS ARE EQUIPPED WITH A CENTER CONSOLE
BETWEEN THE FRONT BUCKET SEATS. THIS CONSOLE EXTENDS INTO THE SECOND SEAT FLOOR PAN
AND AT FIRST GLANCE MAY APPEAR TO KEEP YOUR HUSKY LINER FROM FITTING. TO ACHIEVE THE
PROPER FIT FROM YOUR HUSKY LINER IN CONSOLE EQUIPPED VEHICLES; JUST TRIM AWAY THE
MATERIAL ON THE CENTER HUMP PORTION OF YOUR LINER AS DEMONSTRATED ABOVE (ALSO SEE
PHOTOS ON THE REVERSE SIDE). A TRIM GROOVE IS MOLDED INTO THE LINER TO USE AS A TRIMMING
GUIDE.
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
®
or similar items is discouraged as these products make the liners slick.
FRONT OF VEHICLE
®
or Glass Plus
RIGHT OR
PASSENGER'S
SIDE
NOTICE: RIGHT LINER
OVERLAPS LEFT LINER
®
work well.
6147 Front and Back.doc
04/20/2004