Download Print this page

Radio Shack PRO-2037 Owner's Manual page 31

Programmable scanner
Hide thumbs Also See for PRO-2037:

Advertisement

PRO-2037 Programmable Scanner 200-0461 Understanding the Scanner
UNDERSTANDING MEMORY
You can store frequencies into either a permanent memory location, called
a channel, or a temporary memory location, called a monitor memory.
can store up to 200 channels and 10 monitor memories.
CHANNEL-STORAGE BANKS
To make it easier to identify and select the channels you listen to most
often, channels are divided into 10 channel-storage bank to group
frequencies, such as those used by the police department, fire department,
ambulance services, or aircraft.
For example, there might be three or four police departments in your area,
each using several different frequencies.
other law enforcement agencies such as state police, county sheriffs, or
SWAT teams that use their own frequencies.
enforcement frequencies starting with Channel 1 (the first channel in
Bank 1), then program the fire department, paramedic, and other public
safety frequencies starting with Channel 21 (the first channel in Bank 2).
MONITOR MEMORIES
The scanner also has 10 monitor memories.
temporarily store frequencies while you decide whether or not to save them
in channels.
2 of 3
SEARCH - appears during a limit search
PRIORITY - appears when you turn on the
MONITOR - appears when you listen to a
FM or AM - shows whether the scanner is set
PROGRAM - appears when you program
LOCK-OUT - appears when you lock out a
This is handy for quickly storing an active frequency when
http://support.radioshack.com/support_electronics/doc37/37890.htm
(-L- also appears) or a direct
search (-d- also appears).
Up or Down Arrow also appear to
indicate the search direction.
priority channel feature.
P - appears when the scanner is set
to the priority channel.
monitor memory.
BANK - bars to the right of this
indicator show which memory
banks are turned on for
scanning.
CH - appears with a number (1-200) to
show which of the scanner's
200 channels it is tuned to.
to the FM or AM mode.
AM flashes, you manually
selected the mode.
DELAY - appears when the scanner stops
at a channel you programmed for
a 2-second delay.
frequencies into the scanner's
channels.
channel or manually select a
locked-out channel.
Additionally, there might be
You could program all law
You can use these memories to
If FM or
You
7/29/2007 11:47 AM

Advertisement

loading

This manual is also suitable for:

20-461