Advertisement
PRO-2037 Programmable Scanner 200-0461 Preparation
3.
Release RESET.
Note:
You must release RESET before releasing CLEAR in order to clear the
memory.
CONNECTING HEADPHONES
For private listening, you can connect an optional pair of headphones with
a 1/8-inch plug to the scanner.
Cat. No. 20-210.
Insert the headphones' plug into the HEADPHONE jack on the front of the
scanner.
Note:
Plugging in headphones automatically disconnects the internal speaker.
Listening Safely
To protect your hearing, follow these guidelines when you use headphones.
Set the volume to its lowest setting before you begin listening.
After you put on the headphones, adjust the volume to a comfortable
listening level.
Do not listen at extremely high-volume levels.
listening can lead to permanent hearing loss.
Do not increase the volume once you establish a comfortable listening
level.
Over time, your ears adapt to the volume level, so a volume
level that does not cause discomfort might still damage your hearing.
Traffic Safety
Do not wear headphones while operating a motor vehicle or riding a
bicycle.
This can create a traffic hazard and is illegal in some areas.
Even though some headphones are designed to let you hear some outside
sounds when listening at normal volume levels, they still present a
traffic hazard.
CONNECTING AN EXTERNAL SPEAKER
You can connect an optional external speaker with a 1/8-inch plug to the
scanner.
Use an 8-ohm external speaker capable of handling over 5 watts
of power, such as Cat. No. 21-549.
Insert the speaker cable's plug into the EXT SPKR jack on the back of the
scanner.
Note:
Plugging in an external speaker automatically disconnects the
scanner's internal speaker.
(br/km-02/05/1997)
Privacy Policy
3 of 3
When the display reappears, release CLEAR.
Use monaural headphones, such as
http://support.radioshack.com/support_electronics/doc37/37889.htm
Extended high-volume
7/29/2007 11:47 AM
Advertisement
