Advertisement
PRO-2037 Programmable Scanner 200-0461 Operation
PRO-2037 Programmable Scanner
(200-0461)
Changing the AM/FM Mode
We designed your scanner to automatically select the most common receive
mode for each frequency range.
FREQUENCY (MHz)
30.000
-
54.000
118.000 - 136.975
137.000 - 174.000
380.000 - 512.000
806.000 - 960.000
Although the preset mode is correct in most cases, some harm radio and
military aircraft broadcasts do not receive in the default mode.
scanner is not set to the correct receive mode, the broadcast might sound
weak or distorted.
The scanner was designed to automatically select the most common receive
mode for each frequency range.
most cases, some ham and military broadcasts do not receive in the default
mode.
When the scanner is not set to the correct receive mode, the
broadcast might sound weak or distorted.
To change the mode press AM/FM.
override the default mode.
If you press AM/FM during a limit or direct search, the scanner no longer
uses the default AM/FM mode for each frequency.
searching for frequencies in the selected mode and AM and FM blinks on the
display.
AM or FM blinks even if the mode of the frequency is the same as
the default setting.
holding down CLEAR.
LIMIT SEARCH
Limit search lets you search for active frequency within the range you select, so you can choose which ones you want to store.
1.
Press PROGRAM, then LIMIT. Lo appears on the display.
2.
Using the number keys, enter the lower limit of the Frequency range.
3.
Press ENTER, then LIMIT Hi appears on the display.
4.
Using the number keys, enter the upper limit of the frequency range
and press ENTER
5.
Press the up arrow to search from the lower limit to the upper limit,
or the down arrow to search from the upper limit to the lower limit.
6.
When the scanner stops press MONITOR to store the freq. in a current
monitor memory.
DIRECT SEARCH
When the scanner is stopped on a frequency, you can search up or down from
the current displayed frequency to find more frequencies you want to
store.
1.
Press MANUAL or PROGRAM.
2.
Use the number keys to enter the frequency you want to start the
search from, or use the number keys to to enter the channel nunmber
containing the starting frequency.
3.
Press MANUAL or PROGRAM.
4.
Press the up arrow to search up from the frequency or the down arrow
to search down from the selected frequency.
5.
When the scanner stops press MONITOR to store the frequency in a
current monitor memory.
DELAY
Many agencies use a two-way radio system that might have a pause between a
query and a reply.
each transmission while scanning or searching.
To program a 2-second delay for any channel while scanning, manually
select the channel and press DELAY until DELAY appears on the display.
When your scanner stops on the channel, it waits for 2 seconds after each
transmission before it resumes scanning.
To program a 2-second delay for any active frequency while searching,
1 of 8
Operation
The default settings are:
RECEIVE MODE
FM
AM
FM
FM
FM
Although the preset mode is correct in
AM or FM blinks on the display when you
To return to the default settings, press AM/FM while
Your scanner's delay feature waits for 2 seconds after
http://support.radioshack.com/support_electronics/doc31/31133.htm
Faxback Doc.# 31133
When the
The scanner keeps
7/29/2007 11:46 AM
Advertisement
