HUSKY LINERS 3402 Care And Use Instructions

Husky floor liner

THANK YOU FOR SELECTING A HUSKY FLOOR LINER

Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the

place of your factory floor mats. For correct fit, it is necessary to remove the factory floor mats before

installing your new floor liner . However, do not remove the factory-installed carpeting.

Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The

easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409

well. Use of Armor All

INSTALLATION INSTRUCTIONS FOR YOUR SUBARU

LEFT OR

DRIVER'S

WHEN INSTALLING YOUR DRIVER'S SIDE LINER, MAKE SURE THAT THE FACTORY CARPET HOOK IS

POSITIONED WITH THE HOOK END TOWARDS THE FIREWALL (SEE PHOTO ON BACK SIDE).

TO ALLOW ACCESS TO THE FUEL DOOR RELEASE LEVER WITH YOUR LINER IN PLACE, SIMPLY

TRIM AWAY THE MATERIAL FROM THE LOWERED AREA ON YOUR DRIVER'S SIDE LINER (AREA

SHOWN DARKENED ABOVE). A UTILITY KNIFE WORKS WELL FOR TRIMMING. YOU CAN AVOID

TRIMMING BY JUST LIFTING THE LINER UP TO ACCESS THE RELEASE LEVER.

FROM WINFIELD CONSUMER PRODUCTS

CARE AND USE INSTRUCTIONS

, Son-of-a-Gun

or similar items is discouraged as these products make the liners slick.

OUTBACK/LEGACY

SIDE

or Glass Plus

RIGHT OR

PASSENGER'S

SIDE

work

3402.doc

12/22/2004

Table of Contents

Need help?

Do you have a question about the 3402 and is the answer not in the manual?

Page 1 TRIM AWAY THE MATERIAL FROM THE LOWERED AREA ON YOUR DRIVER’S SIDE LINER (AREA SHOWN DARKENED ABOVE). A UTILITY KNIFE WORKS WELL FOR TRIMMING. YOU CAN AVOID TRIMMING BY JUST LIFTING THE LINER UP TO ACCESS THE RELEASE LEVER. 3402.doc 12/22/2004...
Page 2 CARPET HOOK SHOWN ORIENTED CORRECTLY. IF YOUR HOOK IS NOT SITUATED AS SHOWN, SIMPLY TURN IT TO THIS POSITION. 3402.doc 12/22/2004...