HUSKY LINERS 6377 Care And Use Instructions

THANK YOU FOR SELECTING A HUSKY FLOOR LINER
Your new floor liners are custom molded to fit your particular vehicle. The liners are made to take the place of
your factory floor mats. For correct fit, it is necessary to remove the factory floor mat before installing your new
floor liners. However, do not remove the factory-installed carpeting.
Your liners are made from an engineering resin that is lightweight and extremely tough and durable. The
easiest way to clean your liners is with a damp cloth or sponge. If using a cleaner, 409
®
Use of Armor All , Son-of-a-Gun

INSTALLATION INSTRUCTIONS FOR YOUR FORD EXPLORER

LEFT OR

DRIVER'S SIDE

NOTE: TO ACHIEVE THE CORRECT FIT FOR EXPLORERS EQUIPPED WITH SECOND ROW
BUCKET SEATS/SECOND ROW CONSOLE, SIMPLY TRIM AWAY THE MATERIAL FROM THE
LOWER PORTION OF THE LINER THAT COVERS THE CENTER HUMP (SEE HATCHED AREA
ABOVE). USE THE MOLDED IN TRIM GROOVE AS A GUIDE. A UTILITY KNIFE OR HEAVY
SHEARS WORK WELL FOR TRIMMING. SEE PHOTOS ON BACK SIDE OF PAGE.
FROM WINFIELD CONSUMER PRODUCTS
CARE AND USE INSTRUCTIONS
®
or similar items is discouraged as these products make the liners slick.

SECOND SEAT FLOOR LINER

FRONT OF VEHICLE
®
or Glass Plus
RIGHT OR

PASSENGER'S SIDE

NOTE: PASSENGER'S SIDE
LINER OVERLAPS DRIVER'S
SIDE LINER
®
work well.
6377.doc
12/28/2005