Running The Program; Stopping The Program; Clearing The Flashing End; Verifying A Running Program - Barnstead 47900 Operation Manual

S R & D
INGLE AMP WELL
18
C
ONTROLLER

Running the Program

1. Press the SCROLL button until "StAt"
is displayed, set to "run" with the UP
or DOWN buttons.
2. Press the PAGE button to display
Actual temperature.

Stopping the Program

Press the SCROLL button until "StAt" is dis-
played, set to "oFF" with the UP or DOWN
buttons.

Clearing the Flashing End

Press the PAGE and SCROLL buttons at the
same time.
Switching from Manual Mode
to Auto Mode
Press the SCROLL button until "m-A" is dis-
played. Press the UP or DOWN buttons to
set to "Auto." Press PAGE button to display
Actual temperature.

Verifying a Running Program

Press the SCROLL button until "StAt" is dis-
played. The display will show "run" if the pro-
gram is running, or "oFF" if it is not running.
Press the PAGE button to display Actual tem-
perature.