Switching On And Off; Switching On; Operation - Miele KWT 1602 Vi Operating And Installation Manual

Before using for the first time
^ Clean the inside of the appliance and
the accessories with lukewarm water
and a little washing-up liquid, and
then dry with a soft cloth.
Important:
To ensure the correct functioning of
the appliance, let it stand for approx.
1 1/2 to 2 hours or for approx. 8
hours if it has been transported on
its side to its final location before
connecting it to the mains.

Switching on

^ Open the door.
^ Press the rocker switch on the
right-hand side underneath the
control panel.
This switches all of the zones in the
appliance on or off together.
The appliance will start to cool, and the
interior lighting will come on when the
door is opened.
The access sensor in the control panel
will also light up.

Switching on and off

Please note: switching the appliance
off with the rocker switch does not
disconnect the appliance from the
mains.

Operation

A light touch of the finger on the
sensors is all that is required to operate
this appliance.
Please note:
– A sensor that is available for
selection is always highlighted in
white.
– A sensor that has been selected is
always highlighted in yellow.
^ Touch the access sensor so that it is
highlighted in yellow.
The sensors for the three zones will now
appear in the control panel: the upper,
middle and lower wine-conditioning
zones.
15