Miele KWT 1602 Vi Operating And Installation Manual page 34

Problem solving guide
. . . A fault message with "_F"
appears in the temperature display.
There is a fault. Call the Service
Department.
. . . the display lighting is not
working.
Call the Service Department.
. . . the interior lighting is not
working.
To avoid overheating, the lighting
switches itself off automatically after
approx. 5 minutes if the door is left
open. It will come on again after it has
cooled down sufficiently.
If it does not come on when the door is
opened briefly, then the lighting is
defective.
^ Switch the appliance off by pressing
the On/Off rocker switch to the right
hand side underneath the control
panel.
^ Disconnect the appliance from the
mains electricity supply.
^ Turn the lamp cover anti-clockwise to
remove it.
34
Do not touch halogen lamps with
your bare fingers.
Use a soft cloth when changing a
halogen lamp.
^ Pull the defective halogen lamp out.
^ Fit the new lamp into the holder.
The following type of halogen lamp is
required:
5 W / 12 V / G 4 cap.
^ Replace the lamp cover, turning it
clockwise as far as it will go.
^ Reconnect the appliance to the
electricity supply and switch it on.
. . . a white deposit builds up on the
corks of the bottles.
The corks are oxidising through contact
with the air.
^ Wipe the deposit off with a dry cloth.
The deposit can have a detrimental
effect on the quality of the wine.