Battery Installation; Getting Started; Battery Notice - VTech Kidizoom camera Connect User Manual

Note: The above amounts are approximations, the actual capacity
depends on the shooting environments. The video length limit is 5
minutes per file.

GETTING STARTED

BATTERY INSTALLATION

Note: Adult assembly is required for
battery installation.
• Make sure the camera is turned
OFF.
• Locate the battery covers on the bottom
of the camera. Open the battery covers by separately pressing each trigger
downward.
• Install 4 new "AA" batteries (2 on each side) as shown in the illustration
below.
• Replace each battery cover with the arrow on the trigger pointing
downward. Push down until the battery covers click into position.

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc)
or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult supervision.
6