To Begin Using Kidizoom Camera Connect; Memory Card Installation - VTech Kidizoom camera Connect User Manual

MEMORY CARD INSTALLATION

• Kidizoom Camera Connect supports the below memory cards for
®
memory expansion.
microSD
microSDHC
microSD Logo and microSDHC Logo are trademarks of SD-3C,LCC.
• Make sure the camera is turned OFF.
• Locate the memory card slot at the
bottom of the camera.
• Pull up the rubber cover.
• Insert the memory card (not included)
as illustrated. Once the memory card
is detected and can be used, the
default memory will set as the memory
card automatically.
• To remove the memory card from the
slot, push the card once and it will eject.
Note: If a memory card is being used, data stored in the internal memory
cannot be seen in the camera unless the memory card is removed. To
prevent accidental data loss, make sure you have backed up all important
data from your memory card before using.
TO BEGIN USING KIDIzOOM
CONNECT
• Press the ON/OFF Button
• If it is the first time that you are turning on the Kidizoom
you will see an option to select the date and time. Press the Up
Cursor Button
Press the Left
next setting item. Finally, press the OK button
you wish to change the date & time later, please go to Settings.
• After the date and time is set, when Kidizoom
on, it will go directly into camera mode and you can start taking photos.
to turn on the camera.
to select the correct day, month, year, hour, and minute.
or Right Cursor Button
CAMERA
®
Camera Connect,
®
to jump to the previous or the
to confirm the setting. If
Camera Connect is turned
®
or Down
7