Table of Contents
Advertisement
GB-5751010800
26-01-2004
PROBLEM WARNING LIGHT
The lighted pilot light
safety device of the pressure switch has swit-
ched on. In this case the appliance is deac-
tivated. To restore the proper functioning of
the appliance, eliminate the possible causes
of the problem and press the restore button
7
The causes may be:
1) The exhaust hose forms a siphon in which
condensation water has accumulated: in
this case, it is necessary to drain the accu-
mulated out of the machine, outwards
(never towards the air conditioner) and
eliminate the siphon on the hose.
2) The exhaust hose is obstructed: eliminate
the obstacles which obstruct the expulsion
of the air to the outside.
If, after having repositioned the drainage tube,
the machine still does not start up, the problem
might be more complicated (ex.: obstructed
ventilation fan) and could require the assistan-
ce of the Authorised Service Centre.
RECOMMENDATIONS
Follow these recommendations to achieve
maximum efficiency from your air conditio-
ning unit:
• Close the doors and windows in the room
close doors and windows
where the unit is functioning. The only
exception is in the case of installation throu-
gh a hole in the wall or window. In this case,
you are recommended to allow a small
amount of air to enter through a door or
16:27
Pagina 23
R e c o m m e n d a t i o n s
indicates that the
window to guarantee an adequate
exchange of air.
• Protect the room from direct exposure to
the sun's rays by drawing the curtains
and/or partially lowering the blinds so as
to maximise energy savings.
• Do not rest objects on the air conditioning
unit.
• Do not obstruct the air intake
2
.
• Make sure there are no heat sources in the
room.
• Do not use outdoors.
lower the blinds or draw the curtains
• Make sure the unit is located on a level
floor. If necessary, place the two blocking
25
devices
under the front wheels .
or outlet
8
do not cover
23
Advertisement
Table of Contents
