Table of Contents
Advertisement
If you modify the
partitions or file
system when the
drive is connected
via USB, keep in
mind that the LAN
disk is only able to
access the first
partition and only if
it's formatted using
the FAT32 file
system.
Formatting the drive
will erase all data
and settings of the
LAN disk as well!
For the safe
removal of your
drive and to assure
that no data is lost,
always follow the
correct unplug
procedure.
USER MANUAL
PD-SATA USB/LAN
3.2
Installation on a Mac using USB
3.2.1 USB Connection
Before connecting the devi
been installed properly and the power supply has been
connected to the main socket. If the drive has been pre-
installed and setup already, just connect and turn it on.
•
Turn on your computer and start Mac OS
• Connect the device and turn it on
• No driver installation required
• The external drive will mount and show up on your deskt
If
the system doesn't recognise the drive, make sure it has
been formatted properly by using the disk utility of the LAN
If
the drive has been fo
connect the USB cable.
3
.2.2 Remove Procedure
F
or the safe removal of your drive and to assure that no data is
lost, always follow the correct
• Drag the external hard drive icon into the trash bin.
Page 7 / Chapter 3 - System Setup
ce, make sure the hard drive has
rm
atted already, disconnect and re-
unplug procedure.
op
disk.
Advertisement
Table of Contents
