Table of Contents
Advertisement
If you forgot the
login, press and
hold the reset
button, turn on the
device and wait for
the LED to stop
blinking (~30 sec).
Release the button
and reboot the LAN
disk. This will reset
the device to its
factory default
settings.
USER MANUAL
PD-SATA USB/LAN
1.4 System Requirements
1.4.1 PC Requirements
• Minimum Intel Processor III 500MHz, 128MB RAM
• USB 2.0 (USB 1.1) equipped PC; Windows 2000/XP/Vista
• 10, 100 or 10/100Mbps fast Ethernet card, or a USB-to-
Ethernet converter equipped PC; Windows 2000/XP/Vista
1.4.2 Mac Requirements
• Minimum Apple G4 processor, 128MB RAM
• USB 2.0 (USB 1.1) equipped Mac; Mac OS 10.2 or above
• 10, 100 or 10/100Mbps fast Ethernet card, or a USB-to-
Ethernet converter equipped Mac; Mac OS 10.2 or above
1.5 Detailed View
1.5.1 Rear View
Page 2 / Chapter 1 - Introduction
1. Status lights
Amber = HDD access (HDD)
Yellow = System status (SYSTEM)
Green = Network status (LINK)
2. 10/100 Auto sensing port
(RJ-45)
3. Reset button
4. USB 2.0 interface
5. Power receptacle
6. Power switch
Advertisement
Table of Contents
